Effects of Industrialization on Artist Essay Example for Free

Effects of Industrialization on Artist Essay The countries of the world have largely embraced the goal of industrialization which explains the reason why there is the label of developing and developed countries. The implications of the 19TH century has put the developed western world as the model of industrialization on the planet (Masten, 2008). The face of industrialization affected a number of fields in the scientific attempt to improve the economies and subsequently, raise the overall standards of living . Art was one of the disciplines that benefited from the effects of industrialization, and it came as a hope for many artists around the world (Locker, 1999). This paper therefore attempts to compare and contrast whether the rise changed the modern world leaving the natural world as the sole object of fascination to artists. Industrialization as a process sought to promote social and economic changes with the human societies transforming from pre industrial to industrial(Davis,2000). It saw the wider apart of modernization leading to overall social changes and economic developments mostly related to technological advancement. More cities were development following the rise modernity, as a result of large scale metallurgy and energy production (Basye and Holt, 2000). Philosophical changes also marked the emergence of industrialization leaving people in the western world with a more yearning to obtain different attitudes towards nature and artistic orientation (Novello, 2000). Accordingly, there is substantial research on the prevailing effects of industrialization on modernization and enterprise development . Artists have got an opportunity of expanding their careers following the expansion of commerce and the prevalence of skills that helps them in the exploitation of the abundant natural resources (Shields, 2006). This somehow happens at a relatively low cost, adaptability of labor and continual supply of their products to a wide range of market (Plaura, 2001). The radical changes in the 19th century involve the production of the electric power: an element that is succinctly fundamental to the continuous growth of economy as well as advancing the skills required for a particular job (Basye and Holt, 2000). In a survey done in some countries in Africa, middle East and Latin America, it was found out that there is relative open trading systems that can stimulate industrial innovation and cost efficiency across the board, leading to the readily available markets and free and flexible labor (Novello, 2000). As a result, positive work ethics mixed with skills, effectively used scientific discoveries and technological in boosting the production and subsequent increase in income levels. It is true that a number of major cities in the western world were widely modernized bringing about the effects of urbanization. To serve this house working populations, urbanization facilitated the concentration of labor (Davis, 2000). Artists therefore found themselves without splendid natural resources for them to exploit because of the population upsurge in cities. Consequently, they resorted to the natural worlds which had hitherto not felt the effects of industrialization for their resources (Masten, 2008). Another impact that followed industrialization was change in family structures and effects on the environment. Environmental stressors such as noise, water pollution, impersonal lifestyles and a myriad of health problems set into play (Locker, 1999). Many artists in the present world continue to grow in terms of their careers simply because, they have been able to advance all their artistic orientations (Shields, 2006). Prior to the 19th century, many paintings in America often dealt with the serene landscapes, idealized craftspeople and a host of other people. However, after the effects of industrialization had taken place, the whole scope of photographs and painting changed. Art was basically the reaction to the social and industrial conditions that prevailed (Masten, 2008). Later on, artists was obliged to create art for two audiences. Generally, artists of this important period in the history of mankind avoided painting many scenes portraying the new outfit of modernization and as such, this did not imply that they failed to create an art about the industry. Moreover, the deep enjoyment of art became the pastime for both the upper and middle class people (Davis, 2000). These were the people who essentially, preferred not to clutch over the hard work that may have been done by the lower class, let alone hanging any artistic socials commentary on their walls. Instead there was mere need for a picturesque that portrayed a neutral political landscape (Plaura, 2001). According to (Basye and Holt, 2000), several literatures enabled artists to access a medium where many of their engravings were published but the controversy that followed saw many middle class people opposing the view of the artists and eventually disapproving their works. Irrespective of the upper and middle class reaction against the artistic package of social commentary, many artists continued experiencing the strong urge for expressing themselves through art (Locker, 2000). They then resorted to the natural world where they found a lot of fascination for their works because of two major reasons. Depending on the specific needs of a particular artist, the natural word provided an avenue for artists to explore a host of untapped resources or aptly, got a ready and uncritical audience for their art (Masten, 2008). This basically strengthened their ambitions leading to affair ground for art. For instance, majority of the artistic collections portrayed the hard work of ordinary rural folks giving hem the urge to continue doing even better in their pursuit for economic survival. With this regard, several portraits were painted. They involved persons sewing a dress or a blacksmith hammering a horseshoe. particulrtly, such portraits depicted a blacksmith as possibly the man in charge of an enterprise. It showed a young man in the back, presumably an apprentice or the blacksmith’s assistant. Both were posed with their tools, with drops of sweat other cheeks seemingly proud of their trade. A factor like this one often encourage the general population because, despite the conditions for working being harsh, the portrait depicts clean, bearable and inviting scenario that give the people enthusiasm and pride altogether (Novello, 2000). In addition, the views of American urban life as well as industrialization were manifested through the channel of photography. Using a succinct comparison of the rural life, city life was pictured using sky crappers mushrooming everywhere (Shields, 2006). In this scenario, a chaotic combination of people and carriages filled the city street eliciting a feeling that city life is eventually becoming more foreboding for life and work hence, underscoring the importance of rich environmental conditions found in the rural life. Overly, the dawn of industrialization saw a marked reduction of human working conditions to unacceptable level. Active artists and photographers aligned to politics used art to comment on the industrial progress to their audience. However, there was stiff competition that forced some artists not to make enough fortune or just find a satisfactory audience for their works. They were therefore attracted to move to the rural world, where they got audience and commercial benefits for their activities. Somehow, they used the modern mechanized age to obtain a source of creativity which is paramount to the work of art. Without a creatively compelling work, their will be audience to stand all sorts of unattractive, and redundancy even if your work has the very best of the message (Plaura, 2001). There is a general history of artist getting more fascinated to the natural world. With the advent of industrialization, many artistic movements sprang up each with a unique reaction to the feeling of the movement it took after and time (Davis, 2000). Neoclassic which had taken lead form the Greek and Roman art, paved way for a more parallel period called romanticism. At this level, many artists became more imaginative with the rise of individualism, emotional intensity, and freedom describing the underlying the perceptual shift from the modern life to getting oriented to the natural world (Masten, 2008). Realism which followed brought about the realist artists who created artistic works that captured objectives and figures as they appear in real life. Artists found the natural world more ideal in portraying truthful visions of everyday life; an idea tat was much welcome to rural folks that the modern ones (Novello, 2006). Many artists felt the need to explore their relationship with nature by traveling through a wilderness. But because urban life had less or no fascinating wilderness, artists resorted for the rural world and found it more fascinating in delivering the exploration objective through a natural world (Plaura, 2001). For example, Mark Catesby, as English artist moved to the rural Northern America and found that it was the most true immersion into the American seaboard and other areas still unexploited and unknown to many Americans. He began photographing and drawing natural and social sceneries that had not suffered any natural disintegration, and hence, his works attracted a large scale audience (Shields, 2006). Another artist and explorer, Karl Bodmer, is a testament to the reason moving to natural world. he says that the most fascinating factor in the so regarded lost world is the boundless enthusiasm that artists get when they venture into worlds unknown to many, because there seem to be abundant opportunity and astonishment in those lands (Locker, 1999). The overall benefit is the reminder these places give in acknowledging that at some point, they had stopped at the crossroad of horrible, natural and sacred phenomena. They somewhat develop a relationship with the earth, facilitated by the nature, culture and their sense of fulfillment (Davis, 2000). Furthermore, the natural world is more attracting to artists because; it provides the ground that satisfy the curiosity and creativity of many artists. At the heart of every artistic symbol lies the expression of meaning. Artists tend to search for lager meaning in small aspects of life (Basye and Holt, 2000). According to the documentations in archives, the significance of artistic history is logged in the fissure between wilderness and civilization and this point out the primary focus of artists on rural worlds. Notwithstanding, rural world represents culture and nature and how it is reconciled with the modernization. Therefore, the imaginative role of art pulls out the existing radiance in capturing double meaning encased in the metaphors. When they finally take their products to urban setups, they somehow manage to prompt the city residents into the world of imagination embedded in the images formed in their minds as a resulted art (Masten, 2008). Moreover, artists use the natural worlds to find sources that subsequently define the unique artistic identities. This is clearly captured in the sentiments of a German poet, Rainer Maria. He believes that as a primary condition for writing a captivating verse, it is imperative that they see a myriad of cities, nature, men and several other things. Accordingly it is perquisite that one should know different flights of birds, animals, not forgetting gestures that flowers make especially when they open and close. The fundamental role of all this condition is to portray the accounts as creative as possible with the unique ability to come up with the work of art that suits in the context of everyday life. The only available source of the adventure is the natural world that is least affected by industrialization (Novello, 2000). Similarly, there is more attraction to the natural world. Artists think that by going there they provide a link between city life and rural life. All the opportunities of industrialization are made open to village folks giving them a chance to keep a breast with what is happening across the world (Plaura, 2001). For example, there was a painting in rural Indiana which showed an angel looking as though he is about to walk away from something he is acutely contemplating. It depicted the angel staring with his mouth wide open and the wings flung spread. This is the way artists presents issues in varying worlds and the serenity found in natural world promotes the efficient delivery of the message (Shields, 2006). The painting reinforces the religious teaching that God watches over us and somehow, strengthens the spirituality; an aspect that is under the threat of industrialization. Conclusion From the foregoing discussion, it is evident that the dawn of industrialization in the 19th century was accompanied by the sharp shift in the economical, social and ideological differences that paved way for new lifestyles. Individualism, which became rife as a result of urbanization, left artist with a host of intellectual orientation in terms of creativity. It is evident that the market for their art products got strained obliging them to get attracted to the rural world that had hitherto not adversely suffered from the effects of industrialization. Bibliography Basye, E and Holt, G 2000. Art and Architecture: The Advent of Industrialization, Yales, Yales University Press. Davis, A. 2000. A Social History of Graphic Art and Works Industry. New York, McGill-Queens Press. Locker, N. 1999. Science and Nature: An International Journal of Science. Vol. 23 Issues 56, London, Macmillan Publishers. Masten, A. 2008. Artwork in the Nineteenth Century. Pennsylvania, Pennsylvania University Press Novello, A. 2000. The Face of Art in the Nineteenth Century. London, Prentice Plaura, N. 2001. Art and Nature: Interelationship, Oxford, Oxford University Press Shields, S. 2006. Artists at the Continents End: The Peninsula Art Colony. Michigan, Routledge

Investigating The Importance Of WAN Technologies Information Technology Essay

Investigating The Importance Of WAN Technologies Information Technology Essay Wide area network is very important to the global to do their work easily now days every companies trying to develop their business all over the world wide area network helps them to connect their network together .the companies need to design the network according to their needs and purpose because different type of networks are available for different purpose. According to this project the company network placed in different countries each network hold different application Different type of architecture models is available to design network one is peer to peer model and another one is client/server model most of the network designed by using client/server model. peer to peer model is connect two or more computers connected through network this model is unsafe because it is difficult to implement security policies .different network topologies are available to design network so we have to consider these topologies when design a network. Normally every companies using star topology to design their network because this topology have more advantage when compare with other topologies various hardware components need to design a network such as switches, routers, firewalls, server, linkect By using Ethernet technologies and other network technologies several LAN (local area network) is created in different countries then each subnet LAN was connected together via ATM cloud to make WAN (wide area network) In this project company network model was designed in opnet modeller to investigate the performance of a network looking at WAN technologies with varying traffic loads there are different type of link used to implement the traffic load the network was designed up to getting the final result LITERATURE REVIEW Computer network Computer network is more than one computers or group of computers and network devices are connected together for the purpose sharing information, file and data between each computer. Different type of devices need to design a computer network such as switches, hubs, routers, different link, firewall, server and work station Protocols are use to do sharing information, files, datas over the network there are two transmission technology available in computer network one is broadcast and another is point to point connection. Computer network classified according to network architecture (peer to peer model, client/server mode), network topology (star topology, ring topology, bus topology and mesh network topology).computer network it is classified as personal area network (PAN), local area network (LAN),metropolitan area network(MAN),wide area network(WAN),global area network(GAN) Computer network is very useful to the public because it has many applications such as access to remote information by using this application any one can do their work from anywhere in the world( ticket reservation ,shopping), communication between one to another through email, videoconferencing. Business application Different type of computer network Local area network (LAN) Local area network (LAN) is less number or group of computers and related devices such as printer, scanner etc that share a common communication line.lan is considered within a small geographical area such as a home, office building here LAN is designed by using Ethernet technology such as Ethernet cables, Ethernet switches and adapters. Local area network (LAN) performance features are depending on size of the network, network topologies and transmission technology. Advantage of LAN is cover small geographical area so transmission time is limited. Different type of topologies is support to create broadcast LAN network such as bus and ring based topologies. FIDD is used in the LAN for connect token ring. IEEE 802.11standad indicates the local area network technologies. [Andrew s] Metropolitan area network (MAN) Metropolitan area network (MAN) is developed version of LAN and this network also using same technologies as LAN, compare with LAN it cover large area (company offices and city).this network carrying voice signal and dates. MAN network contain few cables it dont have any switching elements, by using network technologies such as backbone technology, routers and switches it connect several LAN networks. DQDB (distributed queue dual bus) is MAN network standard by using this standard we can expand the network up to 30km and speeds of 34 to 155 Mbit/s Wide area network (WAN) Wide area network (WAN) comparatively covers wide geographical (country or continent) area and connecting number of local area network, local area network connected to a WAN through the public net work such as internet.WAN network can use is satellite system, WAN routers contain antenna by using antenna it can make data transmission. Switching device and transmission link are two separate mechanism of subnet in the WAN network. Different type of transmission link are available to carry the signals and data transmission from one system to another system over the WAN network such as twisted pair cable, coaxial cable and fiber optic cable. WAN is a collection of LAN, these LANs are connected via switching device router so each LAN must contain at least one router to interconnect. WAN network use backbone technology. Global area network (GAN) Global area network (GAN) is collection of different network such as WAN or MAN it covers the very large geographical area (unlimited area). Worldwide individual business companies use GAN network for their process. Network architecture model Client-server network model Client- server model is very useful and popular network model in the network architecture client and server devices are designed for the particular function in the computer network client server model mainly used in internet as well as local area network. Personal computers are client device in the network it is installed with required network software; database and files are stored in the server devices, server devices contain more memory, bigger disk drive than client devices The client server model client makes a request to server and server receives client request and response to their client request. Advantage of client-server model is centralised network model it means all users in the network are connected to a central server. Central server contains all user information and communication information. Configuration of data backup, security policies are easy in this model Peer to peer network model Peer to peer network is suitable for a small network in this model more than one computer or group of computers are connected through the network .peer nodes sharing their documents, audio, video file and datas in digital format a and also they sharing their resource without a dedicated server all connected peers act as either client or server. One system acts as server for one transaction while simultaneously act as client for another transaction in this model every client act as server and server act as client. It is complicated to apply security policies and access policies to the network because peer to peer network is a small contain few computers. Access permission and rights of users set individuality in peer to peer network. This model do not utilize centralized network model so it dont have any user information or communication information NETWORK TOPOLOGIES Different network topologies are available in computer networking they are star topology, bus topology, ring topology, tree topology and mesh topology these topologies help to design an excellent network. when design a network designer should have to choose which topology is suitable for the particular network Ring topology Ring topology is used to connect network devices in ring shape when these devices in ring shape each device has two neighbour devices for their message transaction this message transaction between neighbour only one direction. Ring topology use token passing system to their message transmission and access control. Main drawback of this method is any device fails in network ring that cause entire network transmission become failure this kind of network can manage and implement easily and it normally uses in office, school network different technologies are available to implement ring topology such as token ring and FDDI Star topology Most of the network use star topology because implementation and maintains of this network is easily this kind of networks use point to point connection between devices and central hub main advantage of star topology is any connection fail between device and hub that affect only particular device. This network devices use twisted pair Ethernet cable to connect with central device hub Bus topology Bus topology mainly used in LAN networks because these kinds of topology suitable for limited number of device bus topology use backbone to connect all devices together backbone function as connect different part of network and offering path to message transmission between network. Implementation of this topology is easy and inexpensive. It is possible to message transmission in both directions, to avoid message bouncing use termination at both end of the bus cable there is no need more cabling to connect devices. Main disadvantage of this topology is if backbone cable fails that affect whole network Tree topology Tree topology combines multiple several star topologies together into a bus by using point to point connection hub devices linked to the tree bus to develop network scalability bus/star topology in a hybrid approach. Implementation of this topology is very difficult, if backbone cable file whole network become failure advantage of this topology is each parts connected by point to point link and it supported by a number of hardware and software vendor. Network components Hardware and software components need to create a network there are different type of hardware components available in the network each of them configured for different function. Usually a network contains many components such as switch, router, server, firewall, hub, work stationest. Router Router is one of the important devices in the network it is used to connect more than one network together such as two WANs or two LANs and it allow data transmission between the networks. Routers having routing tables it contain information about network devices that uses to find the destination place of the network. Routers work at transport and network layer of the OSI reference model. Routers maintain traffic control in the network. Switch Switch is one of the hardware devices in the network it is used to connect network device such as server, workstation and printers together with in a local area network .switches work at the data link layer of the OSI reference model. Switches have a facility to check whether that the data received or not, delivering the messages to correct destination and also identifying that the particular data was transferred from which device (source) to other device (destination).`different type of Ethernet switches are available but in this network i have used Ethernet 16 port switches to connect network devices. Server In the client/server networking model a server receive requests from client in the same network or other network and response client request. There are different types of server with their related configuration. In this network i have used many servers such as database server, Email server, VoIP server, HTTP server, FTP server, file server, printer server and backup server. Firewall Main task of the firewall is preventing unprivileged user from accessing the network. There is different type of firewalls such as packet filter firewall, application gateway and proxy server each of them doing different job in the network .firewall implemented in some hardware devices. In this project i have used firewall router in a simulation. Open system interconnection (OSI) model OSI reference model is clearly defined how messages transmitted from source to destination in the networking. OSI reference model contain seven layers such as application layer, presentation layer, session layer, Trans port layer, network layer, data link layer and presentation layer. This model describes structure of a network for applying protocol on seven layers. Every layers doing different function. This model spited into tow part such as upper layers and lower layers. Upper layers associated with software and lower layers associated with hardware. Application layer Application layer is highest layer of OSI reference model. Main function of this layer is interface for users to relate with application and identifying end user, verify resource availability. By using application users can access information at application layer. Application layer providing some services such as file transfer, electronic mail and software services. Many Protocols are implemented in this layer such as file transfer protocol (FTP), hyper text transfer protocol (HTTP), simple mail transfer protocol (SMTP) and telnet. Presentation layer Presentation layer is sixth layer of the OSI reference model this layer receives all messages from application and sends those messages to session layer. Main function of this layer is converting the format of receiving and sending data format and also many functions are undertaking by this layer such as data compression, encryption, decryption, protocol conversation and encodes message for email transaction. Presentation layer providing some services such as simple mail transfer protocol (SMTP), telnet and file transfer protocol (FTP). At this layer data transmission starts with syntax and semantics format. Session layer Fifth layer of the OSI reference model is session layer it provides function to communicate between two nodes in the network this layer create, maintain and stop connection between the node and few protocols are implemented they are data link protocol (DLP), apple talk session protocol (ASP) and printer access control protocol (PAP) these protocols are mainly uses to multimedia messages. Transport layer Data link layer Data link layer is second layer of the OSI reference model the use of this layer is control and arranges all sending messages from software to network link. This layer makes some network setting such as data format setting, time setting and wire setting. it gives many services such as keep all messages are correct format when they transmit, maintain flow control when messages transmit over the link ,detecting error in physical layer and encoding messages for secure transaction. Physical layer Physical layer is lowest layer of the OSI reference model. This layer receives all messages from data link layer in the format of bits and converts into signal (electrical or electromagnetic signal).messages are sending to physical media via switches and wires TCP/IP model TCP/IP model contain four network layers such as application layer, transport layer, internet layer and network inter face layer. TCP/IP model and OSI reference models are providing similar services.TCP/IP model contain network communication protocol used to for different type data transmission between different networks. Simple mail transfer protocol (SMTP), used to Email transaction, file transfer protocol (FTP) used to file transaction etc. This model defines how particular protocols are implemented in a computer for data transmission over the network. End to end connectivity of the TCP/IP model define how datas received, routed and formatted at end nodes. TCP/IP application layer Application layer is higher level protocol of TCP/IP model this layer match to OSI reference model of session layer, application layer and presentation layer. This layer gives different services to user such as file transfer, email ect. Application layer contain many protocol such as simple mail transfer protocol (SMTP), file transfer protocol (FTP) and telnet. All datas are coded in this layer then these datas encapsulated into transport layer. Lower level layers of TCP/IP model treat by application layer. Transport layer Transport layer is third layer of TCP/IP model. This layer providing services these services are managed by the user datagram protocol (UDP) and transmission control protocol (TCP). TCP is connection oriented and reliable transmission protocol. Connection oriented it means source (sender) set up connection with destination (receiver) node before the sending data. Error detection, error correction retransmission of datas is possible in TCP. UDP is connection less and unreliable transmission. Error detection, error correction retransmission of datas is impossible in UDP it is suitable for audio and video transmission. Internet layer Internet layer is second layer of TCP/IP model this model used to transfer the message from source computer to destination computer. Internet protocol (IP) is main protocol of this layer. This protocol providing many services such as routing packets between source and destination. Internet protocols receive messages from network interface layer in the format of bit then make it into packets. Network interface layer is lowest layer of the TCP/IP model main function of this layer is by using protocol it create a connection to physical medium, error detection and packet framing are possible in this layer. This layer contain local area network (LAN) and wide area network (WAN) technologies such as token ring,X.25,ehhernet and frame relay. This layer responsible for physical devices such as wire, cables, network interface card and satellite links. Asynchronous transfer mode (ATM) Asynchronous transfer mode (ATM) contains three layers such as ATM adaption layer, ATM layer and physical layer. This model providing different type of function it used to transfer all type datas such as audio, video and text messages. Same time we can use ATM technology in different network (LAN. MAN and WAN). ATM model contain management, hyphenated and handshaking protocol, quality of services and flow control facilities. Hyphenated protocol is connection oriented; cell switched and point to point.ATM use different type of technologies to data transmission. Fixed -length cells model used to transfer variable frames this model use 48 bytes for data, 5bytes for overhead. ATM adaption layer ATM adaption layer is third layer of this model this model composed application layer, transport layer and session layer of OSI reference mode. There are two different types of layers in ATM adaption layer such as convergence sub layer and segmentation and reassembly sub layer. It is classified into five types of class for providing different type of services. According to this class of services Convergence sub layer receive messages from high level layer, identify the received message format, type finally arrange all messages for sending out. ATM layer ATM layer is second layer of this model this layer providing link between ATM adaption layer and physical layer to transmit cells between those two layers and also create virtual link, doing multiplex and de-multiplex of cells, creating cell header. ATM physical layer ATM physical layer is first layer of this model the main function of this layer is encapsulate all incoming cells in a proper format before transmit bit to the physical medium. Physical layer divided into two sub layers such as transmission convergence sub layer and physical medium dependent sub layer these sub layers are doing different function such as transmission convergence sub layer doing error correction, framing and de-framing of cells and physical medium dependent sub layer assign bit time and coding for the physical medium. Protocols Protocol is a set of rules it is used to transfer the message between one ends to another end. OSI reference model is clearly defined how messages transmitted from source to destination in the networking. This reference model contain seven layers each layers must contain one or more protocol for their message transmission. Internet protocol (IP) Main function of internet protocol (IP) is transmits message between one end to another end. When sends the messages via this protocol message divided into many parts each part contain IP address if end system and this small segment send different ways receiver receive this segment in different order. This protocol implemented in network layer of OSI reference model and internet layer of TCP/IP model so internet protocol (IP) support data transmission to upper level layers in OSI and TCP/IP reference model. This protocol is connection less protocol and we cant make sure about delivery of message. Now days two different version of internet protocols (IP) are available in the networking such as internet protocol version4 (IPV4) and internet protocol version6 (IPV6). Transmission control protocol (TCP) Transmission control protocol (TCP) applied in transport layer of OSI reference model and host to host transport layer of TCP/IP model for message transmission. This protocol is a connection oriented and reliable transmission protocol. Connection oriented it means source (sender) set up connection with destination (receiver) node before the sending data. Error detection, error correction retransmission of datas is possible in TCP. Message transmission via this protocol is very slow because of overhead (20bytes) for error correction/detection and acknowledgement. There are two types of buffers such as sending and receiving buffers these buffers are used to storage, flow control, error detection and correction. Same time messages can be transfer both direction in TCP it provides full duplex transaction and also multiplexing and de-multiplexing are possible in TCP. [Behrouz A.] User datagram protocol (UDP) User datagram protocol (UDP) installed in transport layer of OSI reference model and host to host transport layer of TCP/IP model for message transmission between the layers. This protocol is a connection less and unreliable transmission protocol. Message transmission via UDP is very fast because there is small header (8bytes).this protocol containing many drawbacks such as no error control and no flow control. Receiver cant identify whether this message is original or duplicate when message transfer via UDP. Encapulation and decapitation of messages are possible in UDP when messages transfer from source to destination. [Behrouz A.] Hyper text transfer protocol (HTTP) Main function of hyper text transfer protocol (HTTP) is access data from internet (www).this protocol is applied in application layer of OSI and TCP/IP reference model. It is describe the message transmission over the network from client to server and data format. This protocol use TCP for data transmission between client and server in this model the client first send request to server then server send response message to client. There is no secure message transmission because HTTP does not provide security HTTP provide security when it run over the secure socket layer This protocol messages can only understand by HTTP client and server. [Behrouz A.] File transfer protocol (FTP) File transfer protocol (FTP) is applied in application layer in TCP/IP model. Main function of this protocol is transferring datas from source to destination (client to server or server to client) in easy way.FTP protocol create two link between source and destination one is for message transmission other link for replay.FTP use three commands such as RETR command function of this command is copying files, STOR command function of this command is store the files and LIST command this is for list the files.FTP use different transmission mode to transfer the files such as compressed mode, stream mode and block mode .through the FTP protocol we can send text files, images and ASCII files.FTP use two different TCP port, port 20 is used transfer datas or files between client and server and port 21 is used to control transmission between them. [Behrouz A.] Simple mail transfer protocol (SMTP) Simple mail transfer protocol (SMTP) is installed in application layer in TCP/IP reference model. Function of this protocol is transferring the email messages between client and server and also it contains some commands these commands are used to transfer the datas between client and server. Some other protocols are support to email transmission with SMTP such as post office protocol (POP3) and internet mail access protocol (IMAP4) [Behrouz A.] Simple network management protocol (SNMP) Simple network management protocol (SNMP) is applied in application layer of TCP/IP reference model this type of protocol is used to manage the network for providing better network performance by regular testing system, protect the network from unwanted user by monitoring system. SNMP protocol defines the transaction between the manager and agent. SNMP manager verify the agent details by sending requesting message to agent. SNMP identify the packets exchange between manager and agent [Behrouz A.] Network transmission media A transmission media is necessary to transfer a signal form source to destination in the networking system. Signals are transfer via Guided and unguided transmission media now a days different type of guided transmission media support to carry the signal such as twisted pair cable, coaxial cable and fiber optic cable. Unguided transmission media it is radio wave, micro wave and infrared Twisted pair cable Twisted pair cable is one of the guided transmission media to carry the signal over the network. Analogy and digital signal can be carried by this cable. This cable contains two shield copper wire then these wires are sick together. This type of cables used in telecommunication system. Twisted pair cable not suitable for long expanse, repeaters is needed to use long distance, for small area it will work without amplification. Compare to other cables this type of cable is inexpensive. Two types of twisted pair cables are available one is unshielded twisted pair cable (UTP) another one is shield twisted pair cable (STP). [Andrew s] Coaxial cable Compare to twisted pair cable it is better shield cable it is suitable for carry the signal to long distance. This kind of cables used to carry the high frequency signals and broad band signals as well as this cable carries analogy and digital signal but using different cable. Coaxial cables providing functions in several ways one is baseband it use total bandwidth to carry the signals, another one is broad band it divide the bandwidth with signals. Centre core it is made by hard copper wire, this core is bounded by inner dielectric insulator, copper screen and plastic sheath. [Andrew s], [Michael] Fiber optics cable Fiber optic cables transfer the signal in the form of light beam. This type of cable is used to connect different cities and countries such as telephone connection because these cables are suitable for long distance. Two different types of fibre optic cables are available such as single mode fibber optic cable and multimode fiber optic cable and this cables contain two part such as inner class cylindrical core and outer class cladding Compare with other cables it has many advantage such as it can be used to long distance, signal transmission is very fast and loss of signal is very low. Disadvantage of this cable it is very expensive. [Michael] Quality of services Quality of services (QOS) contains many network technologies to develop a network. Quality of services gives expected result to the network and quality of services develop and determine data transfer, delay, and error rate and loss of cell in the network. It is very use full apply the quality of services to VOIP and video but implementation of quality if services to network is very difficult. Quality of service measure Type of Delay Different type of delay are occur in the network during the data transmission from one system to another system they are processing delay, queuing delay, transmission delay and propagation delay. Processing delay A data(1 bit) transmission time between the end systems (source to destination) it is called processing delay this delay may occur for the following reaction such as error datas transmitting from one system to router, network architecture, switching mode and also it include in configuration of network devices Propagation delay A data (1 bit) of transmission between the source and destination it is called propagation delay. This delay depends on distance between routers and propagation speed; it depends on the transmission media propagation delay calculated by dividing the distance by propagation speed Propagation delay= [Behrouz A] Queuing delay Datas or packets waiting in queue at intermediate device (router) for their transaction, when the network is busy router cant rout all the packet at same time it process these packet one by one so packets need to wait this waiting time is called queuing delay. Transmission delay Transmission delay is amount of time is needed to transfer one bit of data via transmission media. Transmission delay depends on bandwidth and size of the data. Transmission time= [Behrouz A] Jitter Voice over internet protocol (VOIP) Voice over internet protocol (VoIP) is used to communication purpose it means one person can transfer his information to another person through telephone call, voice and fax over the IP based network. To reduce the bandwidth waste VOIP use packet- switching method to telephone calls. Normally more bandwidth is needed to voice transmission but voice data is compressed to small for the transaction so it require small bandwidth. Main advantage of VOIP is reducing the cost of long distance calls, when compare with ordinary phone call for this reason every organization applying VOIP in their networks. IP telephone is used in the VOIP network because IP telephone designed with coder/decoder for convert the voice signal from analogy to digital signal and digital to analogy signal. Softwares and hardware components are helps to connect the phone with network. Different protocols are implemented in the VOIP network for support voice transaction such as RTP(real time transport protocol) it support the delay of audio, H.323 protocol used to multimedia transmission, H.235 protocol used to data encryption. ) [Michael] List of books 1) [Michael] MICHAEL A, WILLIAM M Networking explained, second edition ISBN 1-55558-252-4 2) [Behrouz A.] Behrouz A. Frozen, TCP/IP protocol Suite Fourth Edition ISBN 978-0-07-016678-3 3) [Andrew s] Andrew S.Tanenbaum, computer networks fourth edition ISBN 0-13-038488-7 4) [James F] James F.Kurose, Keith W.ROSE Computer networking, fourth edition, a top down approach ISBN -13:978-0-321-51325-0 ISBN -10:0-321-51325-8 5) [Behrouz A] Behrouz A.Forouzan, data communication and networking, fourth edition ISBN 007-125442-0 List of Internet and

European union came into existence

European union came into existence European Union European Union came into existence with an endeavor to stop the war between the bordering countries and to maintain the peace and harmony throughout the Europe. European Union is constructed on the principles of stability and to promote the prosperity among European nations with presence of security. Recent recession has affected each and every part of the world, though it has a differential effect on each country. Some country has been most affected by it on the other hand some countries are least affected. Europe has been badly affected by the recession this has induced European union to draw a recovery strategy for the next ten years to see a prosperous and a competitive Europe in terms of knowledge and market growth. Effect of financial crisis on European nation Unemployment: financial crisis has lead to an increase in the unemployment and still number of jobs are been laid off from different sectors irrespective of the output, just to minimize and to compensate the previous losses (Andrew Watt, 2009). A report by the European Union tells that in Europe around twenty three million people are unemployed (European Union, 2010). The countries which are most severely affected by the recession and which led to unemployment are Latvia where unemployment rate arose linearly from 11% to 28.2% and the country which was least affected by the recession was Poland, its unemployment rate just arose marginally from 17.8% to 18.2% and its GDP remain constant in comparison to the eastern Europe and a central Europe (European union, 2009). From the unemployment point of view, it is been seen that the financial sector is most affected as compare to the other sectors throughout the Europe. In a report by â€Å"International Labour Organization† the bank s in Ireland are shedding maximum number of jobs. Similarly Dexia bank which is a joint venture between France and Belgium is also shedding large number of jobs. In the UK condition is worse as banks like Barclays and HSBC are laying off thousands of its employs (International Labour Organization, 2009). Export and import weaken: the recession also affected the export and import business of the EU27. The export business which contributes a lot to the economy faced a sharp decline and it could not help in balancing or reversing the effect of recession. It was recorded that during the period of 2008-2009 at the peak of recession, the export business of the United Kingdom fell to 6.9% which is the sharpest decline and which is never recorded in the UK history of export business and its import fell by 1.6% (Kathryn Hopkins, 2010). In euro zone there are countries like Germany, Netherlands and Sweden whose economies to a larger extent are reliant on the export business and at the time of recession they contributed very less to the GDP. They were only able to contribute half of the original contribution to its GDP and a country like France was able to contribute just  ¼ to the GDP. This affected the economy of the European nations badly, though not taking full advantage of the weaken eur o for doing the export business. All together EU27 GDP was reported to be -4% (Media Eghbal, 2009). Mergers and acquisitions: recession has not been beneficial in terms of mergers and acquisitions to Europe. Recession made MA at its lowest from the previous years but still there were some MA taking place within Europe, for example Lactalis a France based company buyed Ladorma a Romania based company and Rochea a Switzerland based company bought its share from Genentech Ltd (Claudiu Vranceanu, 2008). But it has been beneficial to developing countries like India and China, as number of mergers and acquisitions were taking place by them in Europe in 2008-2009. It was noticed that British company jaguar and land rover were acquired by the Indian automaker Tata, to make the British company free from the problem of cash flow (BBC, 2008). Similarly acquisition of Schoeweiss of Germany by the Indian auto maker Mahindra and Mahindra (Nimish Sharma, 2010). Decline in the Inflation rate with a threat of deflation: recession had a positive impact on a euro zone in a way that the inflation which was increasing from day to day basis prior recession, started to decline. In Europe it was recorded that the inflation reduced from 4% in the beginning of 2008 to 2.1% at the end of the year (Media Eghbal, 2009), as there was a shortage of cash flow in the market. In addition to this price of oil were also low, which resulted in the lower inflation rate throughout the Euro zone (Adrian Nash, 2008). It was predicted by the researchers that the consumers will be waiting for the cheaper commodity which will make them defer there purchase for the moment and that would affect the producers and the investors. This would deepen the nature of recession. Decline in the industrial production and reduction in revenue: it was experience for the first time that the Europe27 had a negative industrial growth, country like Germany known for its technicality and capability faced a technical recession for the first time in history, with a negative growth. Same was a fate of all European countries; they also faced a negative growth for example France with -.5%, Italy with -.7% and Spain with -.6% (Euro monitor, 2009). Weak currency and decline in interest rate in Europe: in the recession it was recorded that the euro was as its lowest as compared to the US dollar and UK pound and it was still not taking the advantage of doing the international business in terms of export. To minimize the effect of recession and to bring in the stability the Europe central bank steadily started to cut down its interest rate throughout Europe to promote the investors to take risk and bring in some cash flow in market. Effect on the tourism industry: the European tourism industry was severely affected by the financial crisis. By a report from the commission of European tourism, which states that the Europe experienced a sharpest decline in comparison to other part of the world in terms of the tourism revenue. Similarly a report from the World Tourism Organization also confirmed that the Europe tasted a negative growth of -1.1% in the international tourism in the year 2008 and 2009 (Ivan Camilleri, 2010). Evaluating the strategy for recovery proposed by president Jose Manuel Barrosso The new strategy has been proposed, which is named as â€Å"Europe 2020† has been brought into the act as the Lisbon treaty which was been implemented from the past one decade has come to meet its deadline on 2010. The new strategy for 2020 Europe in some ways is similar to the Lisbon Treaty. As in both the treaties issues of growth and competition with the major countries were discussed. Similarly both the treaties formed the new policy structure and the guidelines for the implementation. But the new strategy for Europe 2020 has introduced some new initiatives, which in the past treaties have been introduced but never have been implemented. The Europe 2020 strategy focuses more on the global warning and on the techniques, which need to be researched and developed for the better future. References Andrew Watt. (2009). ‘The economic crisis in Europe. Available: http://www.europeanforumcyprus.eu/Source/sem4/prs_AndrewWatt.pdf. Last accessed 2 April 2010. Kathryn Hopkins. (2010). ‘January trade deficit widens as exports fall. Available: http://www.guardian.co.uk/business/2010/mar/09/january-trade-deficit-widens. Last accessed 1April 2010. Media Eghbal. (2009). ‘The global financial crisis: recession bites into Western Europe. Available: http://www.euromonitor.com/The_global_financial_crisis_recession_bites_into_Western_Europe. Last accessed 1 April 2010. Claudiu Vranceanu. (2008). ‘Biggest mergers and acquisitions in 2008. Available: http://www.wall-street.ro/articol/English-Version/56433/Biggest-mergers-and-acquisitions-in-2008.html. Last accessed 4 April 2010. BBC. (2008). ‘Tata buys Jaguar. Available: http://news.bbc.co.uk/1/hi/7313380.stm. Last accessed 1 April 2010. Nimish Sharma. (2010). ‘Mergers and acquisitions in times of financial crisis. Available: http://www.dare.co.in/strategy/business-essentials/mergers-and-acquisitions-in-times-of-financial-crisis.htm. Last accessed 28 March 2010. Adrian Ash. (2008). ‘inflation during recession. Available: http://whiskeyandgunpowder.com/inflation-during-recession/. Last accessed 5 April 2010. International Labour Organization. (2009). ‘Impact of financial crisis on financial sector. Available: 12. http://www.ilo.org/wcmsp5/groups/public/dgreports/dcomm/documents/meetingdocument/wcms_103263.pdf. Last accessed 7 April 2010. European Union. (2009). ‘Unemployment in Europe. Available: 14. http://europa.eu/rapid/pressReleasesAction.do?reference=STAT/09/109. Last accessed 1 April 2010. Ivan Camilleri. (2010). ‘European tourism worst hit by recession. Available: http://www.tourismandaviation.com/news-475European_tourism_worst_hit_by_recession. Last accessed 7 April 2010. European Union. (2010). Europe 2020. Available: http://ec.europa.eu/commission_2010-2014/president/news/statements/pdf/20102010_2_en.pdf. Last accessed 2 April 2010.

Joels Dream :: Dialogue Conversation Essays

Joel's Dream Joel was sitting in the airport lounge, sipping his mineral water, when the tanoy came on," BA flight two-six-one to Milan is now boarding. Please make your way to departure gate three, Thank you." " That's me! See you later Shaz, I'll phone you when I get there !" " See you Joel, hope everything goes okay!" After exchanging kisses, Joel picked up his bags and heads off through the Departures corridor and to the plane. Joel was possibly the best talent to come out of Scotland for years. He could play football with such style and skill, this was why he had been offered the most lucrative deal for a Scottish player ever. AC Milan, arguably the greatest team in the world had offered him a deal which would see him earn more than £40000 a week. This would make him the highest paid player in Europe and accelerate him to the top of world football. He was due to meet the manager on Monday to discuss the terms of his contract and if all went well he would sign for Milan and fulfill his dream of being a star footballer and also make his wife Sharon very very happy. Sharon was a gold digger and was after Joel for his money, but she did stick by him, they had been married for two years and if Joel got the contract Sharon would be able to move to Milan and have everything and have everything she desired. So obviously she was very determined to see this deal go through. After arriving at the hotel Joel settles in and unpacks before going to the Milan training camp to meet the players and his (hopefully) new manager, Roberto Ravelli. " Hello! I'm Erigo I will be your guide while you are in Italy. I'm sorry if my English is no good but I am still getting lessons. Anyway welcome to Italy!! Anywhere you want to go I will take you." " Oh thanks but I just want to meet the players then go back to the hotel and get some rest." " I understand it has been a long flight and you need to rest." " Yeah maybe we can go somewhere tomorrow or something!" said Joel who was getting a bit bored of talking and just wanted to get home and sleep. " OK then it's a date," replied Erigo." But I've been instructed to take you on a tour of the stadium before you go!"

Adam Sandlers Kids Choice Award :: essays research papers

Adam Sandler is in control -- really The clout of a child-man Monday, April 14, 2003 Posted: 1:07 PM EDT (1707 GMT) Adam Sandler accepts a Kids' Choice Award for best movie actor. Many adult movie critics would disagree. -------------------------------------------------------------------------------- Story Tools -------------------------------------------------------------------------------- RELATED †¢ Review: Jack's back in 'Anger Management' †¢ 'Anger' tops box office with $44.5M LOS ANGELES, California (AP) -- Adam Sandler, who's become one of Hollywood's top box-office draws by playing infantile men prone to fisticuffs and tantrums, displays in real life a shambling politeness and faux-naive modesty. With a shy smile, he often looks down as he speaks, while deflecting questions with self-deprecating jokes. The 36-year-old comic's almost childlike behavior conceals his status as a Hollywood workaholic who's unwaveringly loyal to his friends. "I was in his office 12 hours a day, and he was either working with me, or working on editing something else, or working on one of his other projects," said David Dorfman, screenwriter of "Anger Management," which co-stars Sandler and Jack Nicholson. "He worked nonstop." Sandler has used his clout not only to gain greater control over his own films, but also to boost the careers of former "Saturday Night Live" friends such as Rob Schneider, David Spade and Dana Carvey by guiding their pet projects through the studio system. Dorfman described Sandler as "a benevolent mogul," and Carvey said his 2002 film, "The Master of Disguise," would have gone nowhere without Sandler's help. "I mean, I owe him. I don't really know why he did it, you'd have to ask him. But it was great to have him push it through. I guess I was nice to him on 'Saturday Night Live,' " Carvey said, adding with a laugh: "Thank God." Critical roasting But some Sandler favors backfire. He gave directing duties of "The Master of Disguise" to his longtime production designer Perry Andelin Blake, although Blake had no previous experience. Critics complained that the film was a mess, and Sony was still reworking the movie shortly before its release last summer. Carvey had already starred on the late-night comedy show for five years when Sandler began appearing in 1991, the same year as Spade, whose 2001 film, "Joe Dirt," and upcoming "Dickie Roberts: Former Child Star" were produced by Sandler. Sandler co-stars with Jack Nicholson in "Anger Management." During his five-year run on the show, Sandler was known for impish characters such as Canteen Boy and musical bits such as Operaman.

IOS 7 vs. IOS 6

IOS 7 vs. IOS 6 When Apple announced it's new OS back in March, many people were very excited at a change to the old IOS 6. As beta testing for the OS began and bugs began to intoxicate the new OS many consumers were left wondering if the need to switch at the final release was the best move and if so, what were the advantages or changes to the new OS. IOS 7 has changed many of the features of IOS 6, but many of the core elements of IOS 6 are ever-present.The First and most noticeable difference in IOS 7 is its new color scheme and lock screen. IOS 6 had a round design and color scheme that was reminiscent of factory gears, and its lock screen was a simple picture with a slider at the bottom. But in the new OS, the color scheme is neon and bright colors, flat design in the sense that none of the home screen apps seem 3d, but also the lock screen is a full screen picture with the date, time, and also a slide to unlock slider.Those few improvements o the overall OS were nice, but the s lide to unlock from the original OS 6 was still there and so were the large digital clock at the top. Another difference is the addition of Control Center. Control Center is a slider at the bottom of the screen that you slide up to use specific features of IOS 7, that in the older OS 6 you would have had to go to the settings menu. The features of Control Center include a slider for brightness, Wi-Fi control, Bluetooth control, and also one of IOS 7's new features, Airdrop.Once again, the new features are great, even though many of the uses of them were in IOS 6. All in all IOS 7 is a step forward in features and still stays true to its predecessor. The new color scheme and lock screen got a complete overhaul, while keeping the same features and core elements of OS 6. Also the addition of Control Center now uses the toggles that could have been found in the settings menu of 10s 6. So once again, apple has made a step up in its Operating System while still staying true to its predece asing one.

Family relationships Essay

Mary Shelley, the author of ‘Frankenstein’ portrays a resurrected creature as either a victim or a monster depending on the reader’s response. In the following essay I am going to explore whether Frankenstein’s creature is a victim or monster; how Mary Shelley put this across in the novel and how Mary has created complicated complex characters. A victim is considered to be someone or something that is: â€Å"harmed or killed by another†; â€Å"harmed by or made to suffer from an act or circumstance† or â€Å"A person who is tricked, swindled taken advantage of†. The word originates from Latin, ‘Victima’, which is defined as â€Å"a person or animal sacrificed to a god†. These definitions link to Frankenstein’s creature because he is sacrificed to knowledge and science; injured emotionally and because of Victor’s obsessions is made to suffer. Also William, Justine, Elizabeth, Victor and the other characters who are harmed, killed and made to suffer would be considered a victim. A monster as defined in the dictionary is: â€Å"legendary animal combining features of animal and human form†; â€Å"any creature so ugly as to frighten people†; â€Å"a person who excites horror by wickedness, cruelty, etc†; â€Å"Any animal or thing huge in size†; â€Å"an animal or plant of abnormal form or the absence of certain parts or organs†. The Story of Frankenstein is extremely famous and Frankenstein’s creature has become a legendary ‘monster’ because of the popular novel: he could be described as legendary and combining animal and human forms due to his mannerisms. Mary Shelley describes the creature as monstrous because he frightens people with his ugliness; becomes cruel and perform horrendous acts. Dr Frankenstein would describe the creature as a cruel and wicked person for killing his family so is therefore monstrous. Theses monstrous actions are counteracted by Dr Frankenstein’s actions because he abandons his ‘son’. Mary Shelley makes links between her life and the novel. This could be to make the novel more original and personal to her and gives a more realistic setting and set of events to novel. Examples of this are: in August 1797 Mary was born and her parents had an ethical opposition to marriage but in March, 5 months earlier to her birth, they married to give their daughter ‘social respectability’. This relates to ‘Frankenstein’ because marriage is portrayed as negative when Elizabeth gets killed after her and Victor marries. On the 10th of September, 1797 Mary Wollstonecraft, Mary’s mother dies 10 days after her birth. This links with Victor’s life because his mother dies of Scarlet fever after nursing Justine, being close to his mother this makes him think about reviving people from the dead. Having an interesting but ‘unusual’ childhood in the novel she describes Victor’s childhood as perfect in contrast to her own. We know this in the following ways: Victor’s parents had a happy marriage. Evidence of this is ‘there was a considerable difference between the ages of my parents, but this circumstance seemed to unite them, only closer in bond of devoted affection. ‘ This shows us that Victor has a strong parent relationship as his parent’s age difference seemed to unite them we also know that Victor’s parents loved him because Mary Shelley wrote ‘my mother’s tender caresses and my father’s smile of benevolent pleasure while regarding me are my first recollections’. This emphasises the strong family bond the Frankenstein family have and shows his fist memories are positive and of his parents love for him. This links with Mary Shelley’s family relationships because in contrast to Victor’s parents, her mother and father were ’emotionally distant’ like Victor and the creature. The Greek myth of Prometheus is said to be linked in to Frankenstein because Shelley wrote a second title to the novel, ‘the Modern Prometheus’. This is because in the story of Prometheus in order to help people Prometheus stole Zeus’s fire from the sun so people would have an advantage over animals since they were given the ability to make weapons and tools. As punishment, Zeus chained Prometheus to a rock where eagles ate his liver when night fell. But when day broke the next day his liver grew back for the eagle to eat again. This torture was to last for an eternity. Eventually, Hercules slew the eagles and released Prometheus. This was to counterbalance the gift of fire the Zeus sent Pandora to earth with her box of evils. Dr Frankenstein wanted to help people by giving them an advantage over animals by resurrecting the dead and stealing people’s peaceful resting. As a punishment, his creation destroyed: his mental well being by obsession to make it; his family by killing them and his life. Overall the myth of Prometheus and the modern Prometheus are about good intentions leading to negative things and life changing experience. In 1817, Percy Shelley (Mary Shelley’s husband) and Byron discussed galvanism which is the idea of reanimating things using electricity. An Italian physicist, Lugi Galvani demonstrated what we now know to be the electrical basis of nerve impulses. Mary Shelley included these ideas in the novel and took scientific experiments to the extreme. Mary Shelley uses different narrators’ point of view in a ‘Russian doll’ narrative structure which changes the narrators as another character tells a different side of the story. She uses different people to help the reader feel like they are going deeper into the story. The different characters have their own different opinions of Frankenstein’s creature just like the reader so our opinions change as we read/hear the story through a different pair of eyes. The three different narrators are: Walton, a sea captain who writes to his sister who tells her about Victor. Victor is the second narrator who tells Walton about his life which comes to the meeting of his creature who then becomes the third narrator. The different perspectives and angles are each biased and as a result the reader sympathises with Victor when he’s telling the story and the ‘monster’ when he narrates. Mary Shelley originally wrote ‘Frankenstein’ beginning from the resurrecting the creature but later added Walton’s narrative. Captain Walton, a sea captain, venturing out to the Artic gives a similar plot to Victor Frankenstein’s. This added section seemed to be slightly random but links as the story unfolds when Victor is found. Walton gives the reader a first impression on Victor, whom he rescues from the harsh bitterly cold of the Artic. Walton description of Victor makes the reader sympathise with his appearance. Walton describes him as ‘his limbs were nearly frozen, and his body dreadfully emaciated by fatigue and suffering’ Mary Shelley includes this because it provides a comparison when Walton describes his admiration to Victor. We know he admires Victor because he writes to his sister ‘he is so gentle, yet so wise; his mind is so cultivated, and when he speaks although his words are culled with choicest art, yet they flow with rapidity and unparallel eloquence. ‘ Walton’s admiration to Victor makes the reader also admire him so therefore is more likely to believe the positive recollection of Victor’s story because two opinions support it. Lost, Victor confides in his saviour as he tells Walton the story of how obsession led to death and this also is a warning to Walton’s obsession for fame and glory. Frankenstein begins with his childhood where Mary Shelley describes this as perfect we know this when she writes; ‘My mother’s tender caresses and my father’s smile of benevolent pleasure while regarding me are my first recollections’. This shows Shelley has made a contrast with Victor’s childhood and later on in his life. This also emphasises his parent’s love, his perfect life and his fond memories of his childhood. This also provides dissimilarity with that of the creature. Frankenstein’s creature never has a perfect life, fatherly love and fond memories. At the beginning the reader does not sympathise with Victor’s privileged background until his mother dies of Scarlet fever: Shelley included this effect to get Victor thinking about life and death and gives an emotionally felt reason to unearth and discover the secret of immorality.